Three-side Trimmer HT-30C
Simply set up the HT-30C through the color touchscreen and place the books on the feed table. Books are automatically transported through the process for accurate, professional trimming.
Innovative Three-side Trimmer – The new HT-30C three-side trimmer trims three sides of a book with a single knife. A pressure clamp holds and rotates the books for sequential top, fore-edge, and bottom trimming.
Robotic Trimming – The operator simply inputs untrimmed and trimmed book size at the color touchscreen. The HT-30C then performs all necessary setups automatically, and transports and trims each book.
Highly Accurate Finishing – Precise servo motors are employed for knife positioning to insure high quality trimming. The servo controlled hydraulic unit adjusts pressure automatically for markless trimming.
Nonstop Trimming – If the book dimensions are same, the HT-30C can trim books of different thickness continuously. Maximum trim thickness is 51 mm/ 2.0”.
Powerful Trimming – Knife operation and book clamping are hydraulic controlled for safe and powerful trimming.
|Untrimmed Book Size||Spine Length × Fore-edge Length
Max. 320 x 235 mmor 12.600” x 9.255”
Max. 320 x 305 mmor 12.600” x 12.010”
at maximum by using the optional cutting module for landscape size Max. 320 x 233.8 mmor 12.600” x 9.200”
at maximum by using the optional cutting module for A6 size
Min. 204 x 136 mmor 7.870” x 5.350”
Min. 152 x 136 mmor 5.985” x 5.350”
at minimum by using the optional cutting module
Min. 152 x 107 mmor 5.985” x 4.210”
at minimum by using the optional cutting module for A6 size
|Trim Width||Max. 99.9 mmor 3.930” Min. 2.0 mmor 0.080”|
|Trim Height||Max. 51 mmor 2.0”|
|Book Stack Height||Max. 300 mmor 11.8”|
|Production Speed||Max. 440 books per hour (Book Thickness 25 mm, 2 piled books)
Max. 500 books per hour (Book Thickness 10 mm, 5 piled books)