RMGT 11 - 1,130 mm Format Offset Presses 1130TP-8(4/4)
TP (Tandem perfector)
The RMGT 11 TP is a unique tandem perfector press on which the reverse-side printing units are connected to a straight printing press via a special translink unit. After printing the reverse side, the front side is printed without reversing the sheets, eliminating various limitations typically associated with perfecting. This also makes it possible to perform perfecting on heavy stock. UV perfecting is also possible by equipping the translink unit with a UV curing unit, providing high-grade printing with no difference in printing quality between the front and reverse sides.
- Special translink unit smoothly transfers sheets from the reverse-side printing units to the front-side printing units without turning the sheets over
- Sheet transfer is performed without changing the gripping side, so plate making position is the same for the front and reverse sides
- Virtually no fan-out, so front and reverse register precision is comparable to that on a straight press
- Configuration can be freely selected from among 1 to 5 reverse-side printing units and 1 to 5 front-side printing units according the job requirements
|Max. printing speed||13,000 S.P.H.|
|Max. sheet size||820 x 1,130 mm|
|Min. sheet size||460 x 620 mm|
|Max. printing area||810 x 1,120 mm|
|Paper thickness||0.04 – 0.6 mm|
Design and specifications are subject to change without notice.
This data was obtained under RMGT’s standard test conditions. Results will vary according to the operating conditions.