RMGT 10 -1,020/1,050 mm Format Offset Presses 1050PF-8(4/4) PF (Convertible Perfector)
The RMGT 10 PF is a convertible perfector press that performs both straight printing and perfecting. A sheet reversing unit installed between the printing units reverses the sheets to enable one-pass perfecting. Switching between straight printing and perfecting is fully automatic and takes just 3 minutes.
- Unique reversing mechanism employing three double-diameter cylinders for fast, high-quality perfecting
- Maintains the same printing speed of 16,000 SPH for both straight printing and perfecting
- Belt transfer guide in the delivery section ensures the belt moves at the same speed as the sheets, preventing scratching of the printed surface
- Parallel processing of printing procedure shortens make-ready time approximately 20-40% compared to previous presses.
Specifications
Model | 1020 model | 1050 model |
---|---|---|
Max. printing speed | 16,200 S.P.H | |
Max. sheet size | 740 x 1,020 mm | 750 x 1,050 mm |
Min. sheet size | Straight printing: 360 x 540 mm Perfecting: 440 x 540 mm |
|
Max. printing area | Straight printing: 730 x 1,020 mm Perfecting: 720 x 1,020 mm |
Straight printing: 740 x 1,050 mm Perfecting: 730 x 1,050 mm |
Paper thickness | 0.04 – 0.6 mm |
Design and specifications are subject to change without notice.
This data was obtained under RMGT’s standard test conditions. Results will vary according to the operating conditions.